50kW_161kWh All in one PV+Storage

I. Core Advantages

Our 50kW/161kWh All in one PV+Storage is a standard industrial and commercial solar-storage integrated system, featuring four key advantages: "High Integration, High Safety, High Yield, and Easy Deployment":

1. Integrated Design

Single cabinet integration: 50kW PCS + 161kWh LFP battery + BMS + EMS + MPPT + temperature control + fire protection + power distribution + communication. Factory pre-installation, factory assembly.

On-site component assembly, plug-and-play, 1-day completion of installation and grid connection, saving 60% installation time and 30% engineering cost compared to traditional separate solutions.

Approximately 1.4 square meters in area, weighing ≤ 1.7 tons. Ordinary forklifts can handle it, no need for dedicated machine rooms.

2. Cell / Battery System Advantages

Standard LFP lithium iron phosphate, compatible with mainstream 3.2V cells, 160S1P architecture, 512V high-voltage platform, cycle life ≥ 6000 times, 100% DOD available.

Built-in self-developed BMS: active balancing, overvoltage / overcurrent / overheat / insulation / thermal runaway multi-level protection, cell-level monitoring + PACK-level protection + system-level isolation triple safety.

Support for multiple brand cell compatibility, customized BMS communication protocol, battery factory can directly配套modules / complete packages， no secondary development required.

3. Efficient and Intelligent， Higher Yield

4 MPPTs， maximum 200% overcapacity for solar power， suitable for complex rooftops / decentralized solar power， increasing solar power utilization by 25%+.

System comprehensive efficiency ≥ 92%， EMS built-in peak-valley arbitrage， self-consumption， backup power， off-grid microgrid four strategies， investment payback period 2.5–3.5 years.

10ms seamless on-grid/off-grid switching， ensuring critical loads are not interrupted； supports black start， off-grid load carrying， 100% output for three-phase imbalance.

4. Safety and Reliability

IP55 protection， -30℃ to +50℃ wide temperature operation， air-cooled cooling， all-weather outdoor deployment.

Aerosol + heptafluoropropane dual fire protection， thermal runaway warning +联动fire extinguishing， certified by international standards such as CE/VDE/UL/ETL， globally compliant.

II. Application Scenarios

This model precisely covers global mainstream industrial and commercial + off-grid / microgrid scenarios， with capacity / power ratio (50kW/161kWh， approximately 3.2 hours) being the most common and best-selling：

1) Domestic Industrial and Commercial

Factories / workshops： peak-valley arbitrage， demand management， backup power， reducing electricity costs by 30%+

Supermarkets / hotels / office buildings： solar power self-use + peak shaving and valley filling + emergency backup power

Industrial parks / incubators： distributed solar storage， multi-machine parallel expansion (up to 6–10 units)

2) Overseas Markets (Europe / Southeast Asia / Middle East / Africa)

Europe： household + small industrial and commercial， solar power self-consumption， grid frequency regulation， backup

Islands in Southeast Asia / without grid： off-grid microgrid， solar storage combined with diesel， self-sufficiency

High-temperature regions in the Middle East： IP55 + wide temperature + air-cooled， suitable for high-temperature sandy environments

3) Special Scenarios

Charging stations / replacement stations： 50kW stable output， peak shaving and valley filling， reducing expansion costs

Data centers / medical facilities / communication base stations： 10ms seamless switching， zero interruption of critical loads

Agricultural greenhouses / livestock farms： solar power + storage + irrigation / lighting， off-grid independent operation

III. Solution Capability

We do not merely sell equipment， but provide a full-stack solar-storage solution from solution design to equipment supply， installation and commissioning， operation and maintenance after-sales， and financing support： 

1. Scheme Design Capability

Free provision: Site survey → Load analysis → Photovoltaic configuration → Energy storage capacity ratio → Grid connection / Off-grid scheme design → Revenue calculation

Support customization: Off-grid / Grid-connected / Hybrid, different voltage levels, communication protocol integration, BMS customized development

2. Delivery and Integration Capability

Self-developed EMS + BMS + PCS, core software is independently controllable, can be integrated with customer platforms / Battery factory BMS

Support multi-machine parallel (up to 10 units), modular expansion, from 50kW to 500kW + smooth expansion

Global localized delivery: Overseas warehouse stocking, local engineers debugging, multi-language documentation

3. Operation and After-sales Capability

Cloud platform + APP remote monitoring: Real-time data, fault warning, remote diagnosis, firmware upgrade, unmanned operation

24/7 technical support: 1-hour response, 4-hour remote resolution, 24-hour on-site service (domestic)

Flexible warranty: Whole machine 5 years, battery 10 years, joint warranty with battery factory

4. Company Strength

1. R&D and Technical Strength

Years of experience in the energy storage industry, core team from leading energy storage / photovoltaic enterprises

Self-developed BMS / EMS / PCS complete software, 20+ patents, continuous iterative upgrade

Products have passed CE / VDE / UL / ETL / ISO9001 / 14001 etc. certifications, global compliance

2. Production Capacity and Supply Chain Strength

Own / Cooperative factories: Annual production capacity of 50kW models ≥ 10,000 units, battery annual supply ≥ 1GWh

Long-term strategic cooperation with first-line LFP cell factories, stable battery supply and controllable costs

Global supply chain layout, key materials stocked for 3 months +, delivery cycle 2–4 weeks

3. Project and Market Performance

Global cumulative delivery of 50kW + models ≥ 2000 units, covering 30 + countries and regions

Domestic: Industrial and commercial projects 500+ units, cumulative capacity ≥ 50MWh

Overseas: Numerous benchmark projects in Europe / Southeast Asia / Middle East, deep cooperation with leading EPC / traders

4. Cooperation Model

For battery manufacturers: OEM/ODM, joint development, customized BMS, exclusive price, joint warranty, market sharing

For traders: Exclusive agency, regional protection, technical training, market support, financing assistance, after-sales guarantee